设计说明：

乙炔充装工艺流程简介(附图)  Brief Introduction of Acetylene filling process (with pictures attached)

电石在电石库经破碎装入电石加料吊桶(V101)内，并移至中间电石库。加料时，用电动葫芦(L101)将吊桶吊至发生器贮料斗上，电石桶经氮气置换后将电石加入贮料斗，然后用电磁振荡器将电石自动投入乙炔发生器(T101)中与水反应产生乙炔气。从发生器出来的乙炔气一路去贮气柜(V103)，另一路经冷却洗涤塔洗涤后进入净化器(T102)。净化后的乙炔气体经低压水分离器(S101)后由乙炔压缩机(C101)增压。增压后的乙炔气进入全自动的分子筛高压干燥器(G101)清除水分后送至充灌排充瓶(N102)。由发生器排出的电石渣水澄清后返回发生器使用，电石渣被用作废酸处理、制砖或道路基础工程等。

After being broken in calcium carbide storehouse, the calcium carbide will be sent into calcium carbide feeding bucket (V101), and moved to the intermediate calcium carbide warehouse. When feeding, electric hoist (L101) can be used to hoist the bucket onto the generator hopper, calcium carbide bucket will feed the calcium carbide into hopper after nitrogen replacement, and then the calcium carbide will be automatically thrown into acetylene generator (T101) by magnetic  oscillator to generate acetylene after reaction with water. A part of the acetylene from the generator will be led into gas holder (V103), and the other part will pass through the cooling & washing column and then flow into purifier (T102). After purification, the acetylene will be separated by passing through low-pressure water separators (S101) and pressurized by acetylene compressor (C101). The pressurized acetylene will flow into fully automatic mole-sieve high-pressure automatic dryer (G101) to remove moisture content, and then it is sent to the filling station (N102) for bottle filling. Calcium carbide slag water discharged from the generator will return to generator to be used after clarification, calcium carbide slag can be taken away for waste acid treatment, brick making, road foundation making, etc.

相关流程：

 溶解乙炔成套设备工艺流程简图

溶解乙炔成套设备主要规格及技术参数